Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Owings Mills: What to Know First
We provide independent Olympia Chimney chimney liner and rebuild service throughout Owings Mills, with most jobs completed in a single visit and upfront pricing agreed before we start. Typical liner replacement runs $2,800-$4,500 depending on flue count and height, while partial rebuilds start around $3,200 and full rebuilds range $6,500-$12,000. We do not quote over the phone without seeing the chimney, and we do not sell work you do not need.
This page is for homeowners in Owings Mills who have an Olympia Chimney liner, cap, or flue component that has failed, is showing age, or was flagged during an inspection. You are probably trying to figure out whether the liner can be repaired, whether you need a full replacement, and whether anyone in the area actually stocks parts for your specific Olympia model. Call (443) 998-2617. A live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 316Ti stainless liners in the OLF series develop creosote pinholing near the smoke chamber elbow, especially in Owings Mills homes that burn primarily oak and hickory. The titanium stabilizes against acid but the seam weld at the elbow collects condensation during our freeze-thaw cycles. We cut back to sound metal and splice in a custom-fabricated OLF-compatible section, or switch to a DuraFlex equivalent when the damage extends past two feet.
- Olympia flexible liners (OLF-5 and OLF-6) in tall chimneys sag between support points after 12-15 years. The corrugated wall fatigues where it hangs free across the flue length, common in the two-story colonials off McDonogh Road with exterior chimneys. We install a new support plate and stainless top plate, then pull a replacement liner with proper tensioning. If the original is still under warranty, we document the failure mode for your claim.
- Olympia cast-in HeatShield-compatible systems crack at the thimble penetration where the liner meets the appliance connector. The crack is often hairline and hidden behind insulation. We run a level-2 camera inspection, photograph the breach, and either re-pour with HeatShield Cerfractory Foam or install a stainless insert depending on the flue diameter and appliance type.
- Olympia chimney caps and chase covers in the OCC series rust through at the drip edge after 8-10 years in Baltimore County’s humid summers. Water runs down the flue and saturates the liner from the outside, causing exterior corrosion that looks like interior failure. We replace with a Gelco or Copperfield cap in the correct dimension, seal the crown, and assess whether the liner damage is superficial or requires replacement.
- Olympia square-to-round adapter plates warp from thermal cycling in fireplaces that are overfired, common in older Owings Mills homes where owners burn stacked logs against the rear wall. The gap pulls cold air, accelerates creosote formation, and distorts the liner termination. We replace the plate with an OEM-spec Olympia part or a Famco equivalent, reset the liner connection, and verify draft with a manometer.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, day or night. We book a level-2 inspection with camera. No deposit, no pressure.
- 2
Inspection and documentation. Our technician runs a camera the full flue length, photographs every defect, and gives you a plain-English verdict on the spot. You see what we see.
- 3
Parts decision. If your Olympia component is available from the manufacturer and cost-effective, we quote OEM. If lead time is excessive or the part is obsolete, we specify a quality aftermarket equivalent from DuraFlex, HeatShield, or Gelco, explain the trade-off, and note any warranty implications.
- 4
Repair or rebuild. We agree on a price before work begins. Most liner replacements and partial rebuilds finish in one day. Full rebuilds may run two days depending on weather and masonry cure time.
- 5
Testing and sign-off. We verify draft, check clearances, and run a final camera pass. You get photos, a written report, and the 90-Day Done Right Promise in writing.
- 6
Cleanup and follow-up. We haul away debris, protect your landscaping, and check in within two weeks to confirm everything is performing as expected.
What Olympia Chimney Chimney Liner & Rebuild Costs in Owings Mills
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia stainless liner replacement (single flue) | $2,800 - $4,500 | Flue height, diameter, number of bends, access difficulty |
| Olympia flexible liner repair (splice or section) | $1,200 - $2,400 | Location of damage, whether support plate needs replacement |
| Partial chimney rebuild (above roofline) | $3,200 - $5,800 | Linear feet of masonry, matching existing brick, scaffold requirements |
| Full chimney rebuild | $6,500 - $12,000 | Height, foundation condition, liner integration, weatherproofing details |
| HeatShield cast-in liner restoration | $2,000 - $3,600 | Flue length, number of cracks, whether smoke chamber needs parging |
These are real numbers for the Owings Mills market, based on jobs we have completed in neighborhoods from Glyndon to Reisterstown. The price we quote is the price on the invoice. No surprises. Call (443) 998-2617 for a free estimate.
Why Owings Mills Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We have been answering the phone with a live person for over 42 years. Our technicians are background-checked, uniformed, and trained on Olympia Chimney products specifically, not just generic stainless liners. We carry DuraFlex, HeatShield, and Gelco as backup options when Olympia parts are backordered, so you are not left waiting through burning season.
Every inspection ends with photos you can see and a plain-English verdict. The 90-Day Done Right Promise covers everything we touch, in writing, with no arguing. We are not the cheapest operation in Baltimore County. We are the one that plans to be here in thirty years to stand behind the work.
Russell Haines and his crew are a familiar sight in Owings Mills, including the older colonials out near McDonogh Road where the fireplaces run hard all winter and the liners rarely get the attention they deserve. Tell me what you’re seeing, and I’ll tell you what it actually means.
FAQs
No, installing aftermarket parts or using an independent technician does not automatically void your warranty, though damage caused by improper installation is not covered. We document our work with photos and written reports so any warranty claim you file with Olympia Chimney is supported by clear evidence of the original failure mode. If your liner is still under warranty, we will flag that during inspection and help you understand your options. Call (443) 998-2617 to schedule.
Most single-flue liner replacements are completed in one day, typically 4-6 hours from setup to final test. Two-flue systems or jobs requiring scaffold access may extend into a second day. We confirm the timeline when we quote, and we do not leave until the job is done right. Call (443) 998-2617 for a free estimate.
Localized damage, such as a pinhole at the elbow or a cracked adapter plate, can often be repaired with a splice, weld patch, or replacement section. If the liner shows widespread corrosion, multiple breaches, or delamination of the corrugated wall, replacement is the safer and more durable choice. We make that determination with camera evidence you can see for yourself, not a sales pitch. Call (443) 998-2617 to schedule an inspection.
We stock common Olympia stainless liners, support plates, and termination components in our Baltimore County warehouse. Specialty sizes or obsolete OLF-series parts may require 3-5 business days. When time is critical, we can often substitute a DuraFlex or Gelco equivalent that matches or exceeds Olympia specifications, with your approval. Call (443) 998-2617 to check availability for your model.
The deciding factor is whether the masonry shell is structurally sound. A cracked or missing liner in an otherwise solid chimney calls for liner repair or replacement. Spalling brick, deteriorated mortar joints, a leaning stack, or a compromised foundation means the chimney needs partial or full rebuild, with a new liner integrated during construction. Our level-2 inspection separates one from the other with photos and a written verdict. Call (443) 998-2617 for a free estimate.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Owings Mills and nearby areas.